Vai al contenuto

LTE Cat-1
Tracker di gestione patrimoniale

The Cat-1 Asset Management Tracker unites multi-GNSS, BLE 5.0 and LTE Cat-1 for always-connected indoor & outdoor asset intelligence. Its twin 4 000 mAh Li-SOCl2 cells (8 000 mAh total) power up to 3+ years of adaptive reporting inside an IP68, palm-sized enclosure. Motion sensors, tamper switch and door-open detection transform raw position pings into actionable utilisation data—ideal for containers, transit cases and unattended machinery.

Asset Management Tracker (Cat-1) Features

Cosa lo rende unico

  • Global Cat-1 Coverage 25 + FDD bands with MQTT / HTTP(S) / TCP / UDP uplinks.
  • Dual-Mode Positioning < 2.5 m CEP by GNSS outdoors; 3 m BLE RSSI indoors.
  • Edge Smart Rules Geo-fence, motion duration, shock, door and tamper alerts on board.
  • Ultra-Long Autonomy 15 µA sleep current yields 30 k GNSS or 500 k BLE reports.
  • Offline Cache & Burst Stores 40 locations when out of coverage, uploads on reconnect.
  • Asset BLE Tag Sync Inventories nearby beacons to know what is inside each case.
  • Wide Temp Range −45 °C … +85 °C operation, waterproof-coated PCB.
  • FOTA & NFC Provisioning Firmware upgrades and tap-to-pair setup without unsealing.

Asset Management Tracker (Cat-1) Use Cases

A cosa potrebbe servire

Factory Machine Status Monitoring Lorawan Container Tracker

Machine-Status Monitor

Correlate vibration hours and shock spikes to schedule maintenance and prevent downtime.

Cold Chain Logistic Temperature Monitoring

Cold-Chain Compliance

Pair with BLE temperature probes inside vaccine coolers; Cat-1 pushes threshold breaches instantly.

Esperienza dei visitatori presso le attrazioni turistiche con il beacon Bluetooth B004

Museum & Exhibit Security

Shock-, motion- and door-sensing safeguard priceless artifacts during transit and storage.

Enhancing Container Tracking Efficiency With Lansitec Lorawan Cat-1 Asset Management Tracker Lansitec

Monitoraggio dei container

Real-time GNSS & door-open alerts secure sea-rail containers through ports, depots and yards.

Dettagli tecnici

Specifiche del prodotto

Meccanica

Dimensione

78*79*35mm with the mounting lugs; 78*66*35mm without the mounting lugs

Peso

133 g

Protezione dall'ingresso

IP68

Materiale dell'alloggiamento

PC e ABS

PCB Coating

Water proof coating

Temperatura di esercizio

-45°C ~ +85°C

Temperatura di conservazione

-60°C ~ +90°C

Umidità di esercizio

0% ~ 95% (senza condensa)

Energia

Batteria

Li/SOCl2 4000mAh x 2

GNSS (report interval >10minutes)

Approx. 30,000 times

Bluetooth positioning

Approx. 500,000 times

Corrente di standby

15μA

Max. Current

145mA

Cat-1

Regioni

America del Nord

Europa / Africa

Cina / India

America Latina

FFD

B2/B4/B5/B12/B13/ B66

B1/B3/B5/B7/B8/B20

B1/B3/B5/B8

B2/B3/B4/B5/B7/B8/B28/ B66

TTD

N / A

N / A

B34/B38/B39/B40/ B41

N / A

Scheda SIM

Nano o eSIM

Protocollo

MQTT, HTTP(S), TCP, UDP

Bluetooth

Protocollo Bluetooth

5.0, iBeacon, Eddystone, privato

Potenza di trasmissione Bluetooth

-20 to +4 dBm TX power, configurable in 4 dBm steps

Sensibilità Bluetooth

-96 dBm

GNSS

GNSS

BDS/GPS/GLONASS

Precisione della posizione GNSS

<2,5 m CEP

Durata dell'avvio a freddo

dai 30 ai 60 anni

AGPS

Supporto

Funzioni

Intervallo di segnalazione della posizione regolabile

5s xn (da 1 a 65536)

Intervallo del report del battito cardiaco

30s xn (da 1 a 65536)

Intervallo di segnalazione della posizione GNSS

5s xn (da 1 a 65536)

FOTA tramite Bluetooth

Supporto

Rapporto sulla temperatura

Facoltativo, si prega di avvisare Lansitec al momento dell'ordine

Gamma del sensore di temperatura

-40°C~+85°C

Precisione della temperatura

Temperatura della camera nel faro, ±5°C

Risoluzione della temperatura

0,25°C

Cellular-based Positioning

Supporto

Configurable Bluetooth data filter and payload report

Filter any data bytes in a Bluetooth payload and report any via Cat-1

Bluetooth data compression

Supporto