Choose “Save as PDF” as the destination to download this doc.

Back to the doc
Lansitec

B002 Bluetooth Beacon Label User Manual

User Manuals  ·  https://www.lansitec.com/es/docs/bluetooth-beacons-documentation/bluetooth-beacons-user-manuals/b002-bluetooth-beacon-label-user-manual/

General Introduction

The B002 beacon is equipped with a three-axis acceleration sensor that can detect whether it is in motion. It can switch between two different advertising modes ( Periodic Mode and Autonomous Mode) by changing the Accelerometer Threshold value. It also supports detecting and advertising the battery level. In autonomous mode, it can advertise every 24 hours if it is not moved.

B002 Bluetooth Beacon Label User Manual
B002 bluetooth beacon label user manual 13

Product Specifications

Table 1: Product Specifications

ProtocoliBeacon
RF Power0dBm in default, -20 to +5dBm TX power
DistanceMax 80m
Density for indoor tracking>10m
BroadcastingMinimum 100ms
AccelerometerOptional
Power consumptionWith acceleration sensor: 5μA @ 5s interval and 0dBm TX power
Without acceleration sensor: 4.2μA @ 5s interval and 0dBm TX power
BatteryLi-MnO2, 500mAh
Weight10g
Dimension90mm*60mm*1.5mm, Thickness: 1.5~2.5mm.68mm*60mm*2mm, Thickness: 1.5~3.5mm.
CertificationFCCID: 2APPL-100-0B, CE

Function Description

On/Off Status

  1. Turn on: Press the button for 3s and the red light flashes for one minute.
  2. Turn off: Press the button for 3s and no light flashes.
Bluetooth Label Button Function
B002 bluetooth beacon label user manual 14

TX Power

The signal strength sent by the beacon. The default value 06 (0dBm)

Table 2: TX Power

Value TypeValueTX Power (dBm)
Hex01-20
02-16
03-12
04-8
05-4
060
074

Advertise Interval

The interval of beacon advertisement is 5s in default, this means that the beacon advertises the advertising packet once every 5s. The maximum Advertisement interval is 10s.

Table 3: Advertise Interval

Value TypeValueInterval (ms)
Hex01000000100
02000000200
03000000300
04000000400
05000000500
…………
6400000010,000

Accelerometer Threshold

The Accelerometer threshold value is 0x00 by default which means that autonomous mode is disabled and the beacon advertises in the Periodic Mode. When the Accelerometer threshold value is greater than or equal to 0x10, the beacon advertises in the Autonomous Mode. The beacon is considered in motion when the accelerated speed is larger than the threshold. The default unit is 16mg, Accelerometer threshold = value * 16mg.

Table 4: Accelerometer Threshold

Value TypeValueThreshold (mg)
Hex0000 means the periodic mode is enabled.
01 ~ 0FReserved for future use.
10256 (0x10 = 16, 16x16mg = 256mg)Autonomous Mode
11272(0x11 = 17, 17x16mg = 272mg)
12288
13304
…………
7F2032

Advertise Mode

Periodic Mode

In the periodic mode, the beacon advertises the advertising packet at fixed intervals as configured until the battery power runs out.

Autonomous Mode

In the autonomous mode, the beacon only advertises when it is in motion. When the acceleration is larger than the Accelerometer threshold, the beacon advertises with the Advertise Interval value for the duration of the Advert Time.

For example, if the interval value is 5s and the advert time is 1min, the beacon will not advertise if it is stationary. When the acceleration is larger than the Accelerometer threshold, the beacon will advertise once every 5s and keep advertising for 1min.

Advert Time

The duration of the beacon advertisement is 0000 by default, and the maximum advertise time is 65535s. This configuration only works in autonomous mode. If the beacon works in periodic mode, this configuration has no effect.

Table 5: Advert Time

Value TypeValueTime (s)
Hex0000Broadcast all the time.
0001 ~ 001DReserved for future use.
001E30
001F31
002032
…………
FFFF65535

Switch Configuration

The B002 beacon has two switch functions: "Battery Level Advert" and "No Movement 24h Advert". The "Battery Level Advert" function determines whether the beacon advertises with the battery level. The "No Movement 24h Advert" function determines whether the beacon advertises every 24 hours if it is not moved.

Table 6: Switch Configuration

NameValueDescription
Battery Level Advert00:disabled, 01:enabled,the default value is 0.This configuration determines whether the beacon advertises the battery level.
No Movement 24h Advert00:disabled, 01:enabled,the default value is 0.This configuration only works in autonomous mode, where the beacon advertises every 24 hours if it is not moved.In periodic mode, this configuration has no effect.

Advertising Feature

In Periodic Mode, the beacon advertises a 30-byte packet with a fixed 5s Advertise Interval. In Autonomous Mode, the beacon only advertises with the advertise interval value for the duration of the Advert Time when it is in motion and will not advertise when it is stationary.

The beacon advertising packet is as follows.

Standard Advertising Packet

The beacon advertises a standard advertising packet when the battery level feature is not enabled.

Table 7. Standard iBeacon Advertising Packet

Byte OffsetDefault ValueDescriptionProperties
00x02Data length – 2 bytesConstant Preamble
10x01Data type – flagsConstant Preamble
20x06LE and BR/EDR flagConstant preamble
30x1AData length – 26 bytesConstant preamble
40xFFData type – Manufacturer specific dataConstant preamble
50x4CManufacturer dataConstant preamble
60x00Manufacturer dataConstant preamble
70x02Manufacturer dataConstant preamble
80x15Manufacturer dataConstant preamble
90xF2Proximity UUID 1st byteUser UUID
100xA5Proximity UUID 2nd byteUser UUID
110x2DProximity UUID 3rd byteUser UUID
120x43Proximity UUID 4th byteUser UUID
130xE0Proximity UUID 5th byteUser UUID
140xABProximity UUID 6th byteUser UUID
150x48Proximity UUID 7th byteUser UUID
160x9CProximity UUID 8th byteUser UUID
170xB6Proximity UUID 9th byteUser UUID
180x4CProximity UUID 10th byteUser UUID
190x4AProximity UUID 11th byteUser UUID
200x83Proximity UUID 12th byteUser UUID
210x00Proximity UUID 13th byteUser UUID
220x14Proximity UUID 14th byteUser UUID
230x67Proximity UUID 15th byteUser UUID
240x20Proximity UUID 16th byteUser UUID
25AAMajor 1st byteMajor value
26BBMajor 2nd byteMajor value
27CCMinor 1st byteMinor value
28CCMinor 2nd byteMinor value
290xB3Signal power (Calibrated SSI@1m)Signal power value

Advertising Package with Battery Level

The beacon also supports advertising battery-level information in the last byte. Chapter 5.2 Battery Level Advert Configuration explains how to enable this feature via "LightBlue".

Table 8: Advertising Packet with Battery Level

Byte OffsetDefault ValueDescriptionProperties
00x02Data length – 2 bytesConstant Preamble
10x01Data type – flagsConstant Preamble
20x06LE and BR/EDR flagConstant preamble
30x1BData length – 27 bytesConstant preamble
40xFFData type - Manufacturer specific dataConstant preamble
50x4CManufacturer dataConstant preamble
60x00Manufacturer dataConstant preamble
70x02Manufacturer dataConstant preamble
80x15Manufacturer dataConstant preamble
90xF2Proximity UUID 1st byteUser UUID
100xA5Proximity UUID 2nd byteUser UUID
110x2DProximity UUID 3rd byteUser UUID
120x43Proximity UUID 4th byteUser UUID
130xE0Proximity UUID 5th byteUser UUID
140xABProximity UUID 6th byteUser UUID
150x48Proximity UUID 7th byteUser UUID
160x9CProximity UUID 8th byteUser UUID
170xB6Proximity UUID 9th byteUser UUID
180x4CProximity UUID 10th byteUser UUID
190x4AProximity UUID 11th byteUser UUID
200x83Proximity UUID 12th byteUser UUID
210x00Proximity UUID 13th byteUser UUID
220x14Proximity UUID 14th byteUser UUID
230x67Proximity UUID 15th byteUser UUID
240x20Proximity UUID 16th byteUser UUID
25AAMajor 1st byteMajor value
26BBMajor 2nd byteMajor value
27CCMinor 1st byteMinor value
28CCMinor 2nd byteMinor value
290xB3Signal power (Calibrated SSI@1m)Signal power value
30Battery levelBattery levelBattery level

Configuring Lansitec BLE Beacon with an iPhone

Notice: all parameters are in hexadecimal coding.

Step 1: Search and download "LightBlue" in the App Store.

Search and download "LightBlue" in the App Store.

Step 2: Long press the button to turn the B002 beacon label. A red light flashes in the first minute.

Step 3: Open LightBlue, and click a beacon with the name "LS_Beacon_Vx.x" which will show up in the app. Please click the iBeacon within 1 minute after powering on, or it must be restarted to enter the configuration mode again.

B002 Bluetooth Beacon Label Configuring

Major Configuration

B002 Bluetooth Beacon Label Major Configuration
B002 bluetooth beacon label user manual 15
B002 Bluetooth Beacon Label Major Configuration 1
B002 bluetooth beacon label user manual 16
  1. Click "Major" (step 1).
  2. Click "Write new value" (step 2).
  3. Enter a new value (step 3) and click "Done" (step 4) to save and click "0xFFF2" (step 5) to return to the "Major" page.
  4. The new value is shown in the value block (step 6) of the "Major" page, and the previous value is grey. Click the "LS_Beacon_V8.3" (step 7) to return to the previous page.
  5. Click "Back" (step 8) to exit the configuration. Otherwise, the change will NOT be saved.

Configure "UUID", "Minor", "Interval", "TX_power", "Accelerometer thld", and "Advert time" in the same way. Please exit LightBlue after configuration. The light stops flashing after configuration.

Battery Level Advert Configuration

B002 Bluetooth Beacon Label Battery Level Advert Configuration
B002 bluetooth beacon label user manual 17
B002 Bluetooth Beacon Label Battery Level Advert Configuration 1
B002 bluetooth beacon label user manual 18
  1. Click "Battery Level Advert" (step 1).
  2. Click "Write new value" (step 2).
  3. Enter value "00" means disable the battery level advertising function, and "01" means enable this function (step 3). Click "Done" (step 4) to save and click "0xFFF8" (step 5) to return to the "Battery Level Advert" page.
  4. The new value is shown in the value block (step 6) of the "Battery Level Advert" page, and the previous value is grey.
  5. Click the " LS_Beacon_V8.3" (step 7) to return to the previous page. Then exit the configuration. Otherwise, the change will NOT be saved.

Configure "No Movement 24h Advert" in the same way. Please exit LightBlue after configuration. The light stops flashing after configuration.

We can also preprogram the "UUID", "Major", "Minor", "Interval", "TX_power", "Accelerometer thld", "Advert time", "Battery Level Advert", and "No Movement 24h Advert" for you and print it on housing before shipment.

Battery Life B002 Bluetooth Beacon Label

Table 9: Battery Life (with the Acceleration Sensor)

Broadcast Interval (ms)10050010005000
Average Current (μA)15433.8175
Battery Life (Month)31529104

Table 10: Battery Life (without the Acceleration Sensor)

Broadcast Interval (ms)10050010005000
Average Current (μA)15333164.2
Battery Life (Month)31531124

Note:

Regarding accuracy, several factors influence the accuracy of distance measurements with BLE RSSI.

  1. Shadow effect: signals can be reflected by walls and glasses around many times during the transmission. Diffraction changes the signal path This results in receiving unstable signal strength.
  2. There are many devices on 2.4G, Wi-Fi, Bluetooth, and Zigbee. The signal may overlap, making the received signal strength unstable.
  3. Due to the semiconductor manufacturing limitation, TX power is not stable.

When using a beacon for positioning, please consider the following method for measuring the distance.

  1. While the beacon is advertising, repeatedly sample the RSSI at a 1-meter distance for a minimum of 10 seconds.
  2. Discard the highest 10% of the RSSI samples.
  3. Discard the lowest 20% of the RSSI samples.
  4. Average the remaining samples to obtain the Measured Power value.

We recommend another two algorithms for calculating the distance and position:

  1. Moving average algorithm, Lansitec document number 930-00171.
  2. Position Calibration, Lansitec document number 930-00172.

How to Install a B002 Bluetooth Beacon Label

How to Install a B002 Bluetooth Beacon Label
B002 bluetooth beacon label user manual 19

Tear the back double-sided adhesive tape and stick it to anywhere you want.

Tear the back double-sided adhesive tape and stick it to anywhere you want.
B002 bluetooth beacon label user manual 20

Packaging

Batch packaging

Batch packaging
B002 bluetooth beacon label user manual 21

Sample packaging

Sample packaging
B002 bluetooth beacon label user manual 22

Ordering Information

DescriptionPN
BLE label, ibeacon, 320mAh100-0B002