The lansitec B006 badge Bluetooth beacon supports detecting and advertising the battery level and advertises BLE packages according to a fixed interval. It supports a low battery alert and a panic button.

Table 1: Product Specifications
| Protocol | iBeacon |
| RF Power | 0dBm in default, -20 to +5dBm TX power |
| Distance | Max 80m |
| Density for indoor tracking | >10m |
| Broadcasting | Minimum 100ms |
| Accelerometer | Optional |
| Power consumption | With acceleration sensor: 5μA @ 5s interval and 0dBm TX power |
| Without acceleration sensor: 4.2μA @ 5s interval and 0dBm TX power | |
| Battery | 440mAh, CR2032x2 |
| Weight | 39g |
| Dimension | 97x62x7mm |
| Certification | FCCID: 2APPL-100-0B, CE |
The beacon checks the voltage every hour. If the battery power is below 20%, the beacon will beep every minute as a warning. To stop the alarm, press the button three times. The alarm will resume after the next voltage check if the battery power is still low.
When the panic button is enabled, the Major field's high bit (binary 1) signifies the panic state. The beacon advertises the status 10 times with the set interval. For example, if the Major is 0x0010 and the Minor is F1BC. Major becomes 0x8010.
0x02 01 06 1A FF 4C 00 02 15 F2 A5 2D 43 E0 AB 48 9C B6 4C 4A 83 00 14 67 20 00 10 F1 BC B3 (panic button not pressed)
0x02 01 06 1A FF 4C 00 02 15 F2 A5 2D 43 E0 AB 48 9C B6 4C 4A 83 00 14 67 20 80 10 F1 BC B3 (panic button pressed)
The panic button is enabled by default. Please get in touch with Lansitec if you do not need it.
Table 2: TX Power
| Value Type | Value | TX Power (dBm) |
| Hex | 01 | -20 |
| 02 | -16 | |
| 03 | -12 | |
| 04 | -8 | |
| 05 | -4 | |
| 06 | 0 | |
| 07 | 4 |
The interval of beacon advertisement is 5s in default, this means that the beacon advertises the advertising packet once every 5s. The maximum Advertisement interval is 10s.
Table 3: Advertise Interval
| Value Type | Value | Interval (ms) |
| Hex | 01000000 | 100 |
| 02000000 | 200 | |
| 03000000 | 300 | |
| 04000000 | 400 | |
| 05000000 | 500 | |
| …… | …… | |
| 64000000 | 10,000 |
The Lansitec badge Bluetooth beacon has a switch function "Battery Level Advert". It determines whether the beacon advertises with the battery level.
Table 4: Switch Configuration
| Name | Value | Description |
| Battery Level Advert | 00:Disabled, 01:Enabled, | This configuration determines whether the beacon advertises the battery level. The default value is 0. |
The beacon advertises a standard advertising packet when the battery level feature is not enabled.
Table 5. Standard iBeacon Advertising Packet
| Byte Offset | Default Value | Description | Properties |
| 0 | 0x02 | Data length – 2 bytes | Constant Preamble |
| 1 | 0x01 | Data type – flags | Constant Preamble |
| 2 | 0x06 | LE and BR/EDR flag | Constant preamble |
| 3 | 0x1A | Data length – 26 bytes | Constant preamble |
| 4 | 0xFF | Data type – Manufacturer specific data | Constant preamble |
| 5 | 0x4C | Manufacturer data | Constant preamble |
| 6 | 0x00 | Manufacturer data | Constant preamble |
| 7 | 0x02 | Manufacturer data | Constant preamble |
| 8 | 0x15 | Manufacturer data | Constant preamble |
| 9 | 0xF2 | Proximity UUID 1st byte | User UUID |
| 10 | 0xA5 | Proximity UUID 2nd byte | User UUID |
| 11 | 0x2D | Proximity UUID 3rd byte | User UUID |
| 12 | 0x43 | Proximity UUID 4th byte | User UUID |
| 13 | 0xE0 | Proximity UUID 5th byte | User UUID |
| 14 | 0xAB | Proximity UUID 6th byte | User UUID |
| 15 | 0x48 | Proximity UUID 7th byte | User UUID |
| 16 | 0x9C | Proximity UUID 8th byte | User UUID |
| 17 | 0xB6 | Proximity UUID 9th byte | User UUID |
| 18 | 0x4C | Proximity UUID 10th byte | User UUID |
| 19 | 0x4A | Proximity UUID 11th byte | User UUID |
| 20 | 0x83 | Proximity UUID 12th byte | User UUID |
| 21 | 0x00 | Proximity UUID 13th byte | User UUID |
| 22 | 0x14 | Proximity UUID 14th byte | User UUID |
| 23 | 0x67 | Proximity UUID 15th byte | User UUID |
| 24 | 0x20 | Proximity UUID 16th byte | User UUID |
| 25 | AA | Major 1st byte | Major value |
| 26 | BB | Major 2nd byte | Major value |
| 27 | CC | Minor 1st byte | Minor value |
| 28 | CC | Minor 2nd byte | Minor value |
| 29 | 0xB3 | Signal power (Calibrated SSI@1m) | Signal power value |
The beacon also supports advertising battery-level information in the last byte. Chapter 5.2 Battery Level Advert Configuration explains how to enable this feature via "LightBlue".
Table 6: Advertising Packet with Battery Level
| Byte Offset | Default Value | Description | Properties |
| 0 | 0x02 | Data length – 2 bytes | Constant Preamble |
| 1 | 0x01 | Data type – flags | Constant Preamble |
| 2 | 0x06 | LE and BR/EDR flag | Constant preamble |
| 3 | 0x1B | Data length – 27 bytes | Constant preamble |
| 4 | 0xFF | Data type - Manufacturer specific data | Constant preamble |
| 5 | 0x4C | Manufacturer data | Constant preamble |
| 6 | 0x00 | Manufacturer data | Constant preamble |
| 7 | 0x02 | Manufacturer data | Constant preamble |
| 8 | 0x15 | Manufacturer data | Constant preamble |
| 9 | 0xF2 | Proximity UUID 1st byte | User UUID |
| 10 | 0xA5 | Proximity UUID 2nd byte | User UUID |
| 11 | 0x2D | Proximity UUID 3rd byte | User UUID |
| 12 | 0x43 | Proximity UUID 4th byte | User UUID |
| 13 | 0xE0 | Proximity UUID 5th byte | User UUID |
| 14 | 0xAB | Proximity UUID 6th byte | User UUID |
| 15 | 0x48 | Proximity UUID 7th byte | User UUID |
| 16 | 0x9C | Proximity UUID 8th byte | User UUID |
| 17 | 0xB6 | Proximity UUID 9th byte | User UUID |
| 18 | 0x4C | Proximity UUID 10th byte | User UUID |
| 19 | 0x4A | Proximity UUID 11th byte | User UUID |
| 20 | 0x83 | Proximity UUID 12th byte | User UUID |
| 21 | 0x00 | Proximity UUID 13th byte | User UUID |
| 22 | 0x14 | Proximity UUID 14th byte | User UUID |
| 23 | 0x67 | Proximity UUID 15th byte | User UUID |
| 24 | 0x20 | Proximity UUID 16th byte | User UUID |
| 25 | AA | Major 1st byte | Major value |
| 26 | BB | Major 2nd byte | Major value |
| 27 | CC | Minor 1st byte | Minor value |
| 28 | CC | Minor 2nd byte | Minor value |
| 29 | 0xB3 | Signal power (Calibrated SSI@1m) | Signal power value |
| 30 | Battery level | Battery level | Battery level |
Notice: all parameters are in hexadecimal coding.'
Step 1: Search and download "LightBlue" in the App Store.

Step 2: Long press the button to turn the lunci badge beacon. A red LED flashes 10 times.
Step 3: Open LightBlue and click a beacon with the name "LS_Beacon_V96" which will show up in the app. An enter password is required when connecting this beacon, otherwise you can only view the configuration and cannot modify it.

Step 3: Enter the password: 116321.


Configure "UUID", "Minor", "Interval", and "TX_power" in the same way. Please exit LightBlue after configuration. The light stops flashing after configuration.


We can also preprogram the "UUID", "Major", "Minor", "Interval", "TX_power", and "Battery Level Advert" for you and print it on housing before shipment.
Table 7: Battery Life (with the Acceleration Sensor)
| Broadcast Interval (ms) | 100 | 500 | 1000 | 5000 |
| Average Current (μA) | 154 | 33.8 | 17 | 5 |
| Battery Life (Month) | 2 | 13 | 26 | 91 |
Table 8: Battery Life (without the Acceleration Sensor)
| Broadcast Interval (ms) | 100 | 500 | 1000 | 5000 |
| Average Current (μA) | 153 | 33 | 16 | 4.2 |
| Battery Life (Month) | 2 | 13 | 27 | 109 |
Note:
Regarding accuracy, several factors influence the accuracy of distance measurements with BLE RSSI.
When using a beacon for positioning, please consider the following method for measuring the distance.
We recommend another two algorithms for calculating the distance and position:

Open the device housing and replace the CR2032 battery
Batch packaging

Sample packaging

| Description | PN |
| BLE Beacon, BLE 5.0, Beeper, LED, 97x62x7mm, 440mAh | 100-03781 |