Choose “Save as PDF” as the destination to download this doc.

Back to the doc
Lansitec

i5 Wearable Bluetooth Beacon User Manual

User Manuals  ·  https://www.lansitec.com/pt/docs/bluetooth-beacons-documentation/bluetooth-beacons-user-manuals/i5-wearable-bluetooth-beacon-user-manual/

General Introduction

The i5 beacon advertises BLE packages according to a fixed interval. It supports panic button.

When 3D acceleration is enabled, it can detect whether it is in motion. It switches between two advertising modes ( Periodic Mode and Autonomous Mode) by changing the G-sensor Threshold value. It also supports detecting and advertising the battery level. In autonomous mode, it can advertise every 24 hours if it is not moved. 3D acceleration is not enabled by default. Please get in touch with Lansitec to use it.

i5 Wearable Bluetooth Beacon
The beacon continuously advertises ibeacon messages according to settings. The silicon gel bracelet and ip67 enclosure make it perfect for tracking patients and visitors for ensuring safety or monitoring timing.
i5 Wearable BLE Beacon
I5 wearable bluetooth beacon user manual 16

Product Specifications

Table 1: Product Specifications

ProtocoliBeacon
RF Power0dBm in default, -20 to +5dBm TX power
DistanceMax 80m
Density for indoor tracking>10m
BroadcastingMinimum 100ms
AccelerometerOptional
Power consumptionWith acceleration sensor: 5μA @ 5s interval and 0dBm TX power
Without acceleration sensor: 4.2μA @ 5s interval and 0dBm TX power
BatteryCR2032, 230mAh
Weight6.2g
Dimension32x9mm (DxH)
CertificationFCCID: 2APPL-100-0B, CE

Function Description

Button

The button can be used to turn on and off by long-pressing the beacon for 3 seconds.

When the panic button is enabled, the Major field's high bit (binary 1) signifies the panic state. The beacon advertises the status 10 times with the set Interval. For example, if the Major is 0x0010 and the Minor is F1BC. Major becomes 0x8010.

0x02 01 06 1A FF 4C 00 02 15 F2 A5 2D 43 E0 AB 48 9C B6 4C 4A 83 00 14 67 20 00 10 F1 BC B3 (panic button not pressed)

0x02 01 06 1A FF 4C 00 02 15 F2 A5 2D 43 E0 AB 48 9C B6 4C 4A 83 00 14 67 20 80 10 F1 BC B3 (panic button pressed)

The panic button is enabled by default. Please get in touch with Lansitec if you do not need it.

TX Power

The signal strength sent by the beacon. The default value 06 (0dBm)

Table 2: TX Power

Value TypeValueTX Power (dBm)
Hex01-20
02-16
03-12
04-8
05-4
060
074

Advertise Interval

The Interval of beacon advertisement is 5s in default, and this means that the beacon advertises the advertising packet once every 5s. The maximum Advertisement interval is 10s.

Table 3: Advertise Interval

Value TypeValueInterval (ms)
Hex01000000100
02000000200
03000000300
04000000400
05000000500
…………
6400000010,000

G-sensor Threshold

The g-sensor threshold value is 0x00 by default, meaning that autonomous mode is disabled and the beacon advertises in the Periodic Mode. When the g-sensor threshold value is greater than or equal to 0x10, the beacon advertises in the Autonomous Mode. The beacon is considered in motion when the accelerated speed is larger than the threshold. The default unit is 16mg, g-sensor threshold = value * 16mg.

Table 4: G-sensor Threshold

Value TypeValueThreshold (mg)
Hex0000 means the periodic mode is enabled.
01 ~ 0FReserved for future use.
10256 (0x10 = 16, 16x16mg = 256mg)Autonomous Mode
11272(0x11 = 17, 17x16mg = 272mg)
12288
13304
…………
7F2032

Advertise Mode

Periodic Mode

In the periodic mode, the beacon advertises the advertising packet at fixed intervals as configured until the battery power runs out.

Autonomous Mode

In the autonomous mode, the beacon only advertises when it is in motion. When the acceleration is larger than the g-sensor threshold, the beacon advertises with the Advertise Interval value for the duration of the Advert Time.

For example, if the interval value is 5s and the advert time is 1min, the beacon will not advertise if it is stationary. When the acceleration is larger than the g-sensor threshold, the beacon will advertise once every 5s and keep advertising for 1 minute.

Advert Time

The duration of the beacon advertisement is 0000 by default, and the maximum advertisement time is 65535s. This configuration only works in autonomous mode. If the beacon works in periodic mode, this configuration has no effect.

Value TypeValueTime (s)
Hex0000Broadcast all the time.
0001 ~ 001DReserved for future use.
001E30
001F31
002032
…………
FFFF65535

Switch Configuration

The i5 beacon has two switch functions: "Battery Level Advert" and "No Movement 24h Advert". The "Battery Level Advert" function determines whether the beacon advertises with the battery level. The "No Movement 24h Advert" function determines whether the beacon advertises every 24 hours if it is not moved.

Table 6: Switch Configuration

NameValueDescription
Battery Level Advert00: disabled, 01: enabled,the default value is 0.This configuration determines whether the beacon advertises the battery level.
No Movement 24h Advert00: disabled, 01: enabled,the default value is 0.This configuration only works in autonomous mode, where the beacon advertises every 24 hours if it is not moved.In periodic mode, this configuration has no effect.

Advertising Feature

In Periodic Mode, the beacon advertises a 30-byte packet with a fixed 5s Advertise Interval. In Autonomous Mode, the beacon only advertises with the advertise interval value for the duration of the Advert Time when it is in motion and will not advertise when it is stationary.

The beacon advertising packet is as follows.

Standard Advertising Packet

The beacon advertises a standard advertising packet when the battery level feature is not enabled.

Table 7. Standard iBeacon Advertising Packet

Byte OffsetDefault ValueDescriptionProperties
00x02Data length – 2 bytesConstant Preamble
10x01Data type – flagsConstant Preamble
20x06LE and BR/EDR flagConstant preamble
30x1AData length – 26 bytesConstant preamble
40xFFData type – Manufacturer specific dataConstant preamble
50x4CManufacturer dataConstant preamble
60x00Manufacturer dataConstant preamble
70x02Manufacturer dataConstant preamble
80x15Manufacturer dataConstant preamble
90xF2Proximity UUID 1st byteUser UUID
100xA5Proximity UUID 2nd byteUser UUID
110x2DProximity UUID 3rd byteUser UUID
120x43Proximity UUID 4th byteUser UUID
130xE0Proximity UUID 5th byteUser UUID
140xABProximity UUID 6th byteUser UUID
150x48Proximity UUID 7th byteUser UUID
160x9CProximity UUID 8th byteUser UUID
170xB6Proximity UUID 9th byteUser UUID
180x4CProximity UUID 10th byteUser UUID
190x4AProximity UUID 11th byteUser UUID
200x83Proximity UUID 12th byteUser UUID
210x00Proximity UUID 13th byteUser UUID
220x14Proximity UUID 14th byteUser UUID
230x67Proximity UUID 15th byteUser UUID
240x20Proximity UUID 16th byteUser UUID
250x00Major 1st byteMajor value
260x10Major 2nd byteMajor value
270xF1Minor 1st byteMinor value
280xBCMinor 2nd byteMinor value
290xB3Signal power (Calibrated SSI@1m)Signal power value

Advertising Package with Battery Level

The beacon also supports advertising battery-level information in the last byte. Chapter 5.2 Battery Level Advert Configuration explains how to enable this feature via "LightBlue".

Table 8: Advertising Packet with Battery Level

Byte OffsetDefault ValueDescriptionProperties
00x02Data length – 2 bytesConstant Preamble
10x01Data type – flagsConstant Preamble
20x06LE and BR/EDR flagConstant preamble
30x1BData length – 27 bytesConstant preamble
40xFFData type - Manufacturer specific dataConstant preamble
50x4CManufacturer dataConstant preamble
60x00Manufacturer dataConstant preamble
70x02Manufacturer dataConstant preamble
80x15Manufacturer dataConstant preamble
90xF2Proximity UUID 1st byteUser UUID
100xA5Proximity UUID 2nd byteUser UUID
110x2DProximity UUID 3rd byteUser UUID
120x43Proximity UUID 4th byteUser UUID
130xE0Proximity UUID 5th byteUser UUID
140xABProximity UUID 6th byteUser UUID
150x48Proximity UUID 7th byteUser UUID
160x9CProximity UUID 8th byteUser UUID
170xB6Proximity UUID 9th byteUser UUID
180x4CProximity UUID 10th byteUser UUID
190x4AProximity UUID 11th byteUser UUID
200x83Proximity UUID 12th byteUser UUID
210x00Proximity UUID 13th byteUser UUID
220x14Proximity UUID 14th byteUser UUID
230x67Proximity UUID 15th byteUser UUID
240x20Proximity UUID 16th byteUser UUID
250x00Major 1st byteMajor value
260x10Major 2nd byteMajor value
270xF1Minor 1st byteMinor value
280xBCMinor 2nd byteMinor value
29Battery levelBattery levelBattery level

Configuring Lansitec BLE Beacon with an iPhone

Notice: all parameters are in hexadecimal coding.

Step 1: Search and download "LightBlue" in the App Store.

Search and download "LightBlue" in the App Store.

Step 2: Long-pressing the button to power up the beacon.

Step 3: Open LightBlue, and click a beacon with the name "LS_Beacon_V8.3" which will show up in the app. Please click the iBeacon within 1 minute after powering on, or it must be restarted to enter the configuration mode again.

i5 Wearable Bluetooth Beacon Configuration

Major Configuration

i5 Wearable Bluetooth Beacon Major Configuration
I5 wearable bluetooth beacon user manual 17
i5 Wearable Bluetooth Beacon Major Configuration 1
I5 wearable bluetooth beacon user manual 18
  1. Click "Major" (step 1).
  2. Click "Write new value" (step 2).
  3. Enter a new value (step 3) and click "Done" (step 4) to save and click "0xFFF2" (step 5) to return to the "Major" page.
  4. The new value is shown in the value block (step 6) of the "Major" page, and the previous value is grey. Click the "LS_Beacon_V8.3" (step 7) to return to the previous page.
  5. Click "Back" (step 8) to exit the configuration. Otherwise, the change will NOT be saved.

Configure "UUID", "Minor", "Interval", "TX_power", "G-sensor thld", and "Advert time" in the same way. Please exit LightBlue after configuration. The light stops flashing after configuration.

Battery Level Advert Configuration

i5 Wearable Bluetooth Beacon 5.2Battery Level Advert Configuration
I5 wearable bluetooth beacon user manual 19
i5 Wearable Bluetooth Beacon 5.2Battery Level Advert Configuration 1
I5 wearable bluetooth beacon user manual 20
  1. Click "Battery Level Advert" (step 1).
  2. Click "Write new value" (step 2).
  3. Enter value "00" means disable the battery level advertising function, and "01" means enable this function (step 3). Click "Done" (step 4) to save and click "0xFFF8" (step 5) to return to the "Battery Level Advert" page.
  4. The new value is shown in the value block (step 6) of the "Battery Level Advert" page, and the previous value is grey.
  5. Click the " LS_Beacon_V8.3" (step 7) to return to the previous page. Then exit the configuration. Otherwise, the change will NOT be saved.

Configure "No Movement 24h Advert" in the same way. Please exit LightBlue after configuration. The light stops flashing after configuration.

We can also preprogram the "UUID", "Major", "Minor", "Interval", "TX_power", "G-sensor thld", "Advert time", "Battery Level Advert", and "No Movement 24h Advert" for you and print it on housing before shipment.

Battery Life of i5 Wearable Bluetooth Beacon

Table 9: Battery Life (with the Acceleration Sensor)

Broadcast Interval (ms)10050010005000
Average Current (μA)15433.8175
Battery Life (Month)171347

Table 10: Battery Life (without the Acceleration Sensor)

Broadcast Interval (ms)10050010005000
Average Current (μA)15333164.2
Battery Life (Month)171457

Note:

Regarding accuracy, several factors influence the accuracy of distance measurements with BLE RSSI.

  1. Shadow effect: signals can be reflected by walls and glasses around many times during the transmission. Diffraction changes the signal path This results in receiving unstable signal strength.
  2. There are many devices on 2.4G, Wi-Fi, Bluetooth, and Zigbee. The signal may overlap, making the received signal strength unstable.
  3. Due to the semiconductor manufacturing limitation, TX power is not stable.

When using a beacon for positioning, please consider the following method for measuring the distance.

  1. While the beacon is advertising, repeatedly sample the RSSI at a 1-meter distance for a minimum of 10 seconds.
  2. Discard the highest 10% of the RSSI samples.
  3. Discard the lowest 20% of the RSSI samples.
  4. Average the remaining samples to obtain the Measured Power value.

We recommend another two algorithms for calculating the distance and position:

  1. Moving average algorithm, Lansitec document number 930-00171.
  2. Position Calibration, Lansitec document number 930-00172.

Installation

i5 Wearable Bluetooth Beacon Installation
I5 wearable bluetooth beacon user manual 21
i5 Wearable Bluetooth Beacon Installation 1

Option1: Wear it as a wristband.

i5 Wearable Bluetooth Beacon Installation 2

Option2: Attach it to a key chain or a clip.

How to Replace the Batteries

i5 Wearable Bluetooth Beacon Installation 3
I5 wearable bluetooth beacon user manual 22

Packaging

Batch packaging

Packaging B006 Badge Bluetooth Beacon
I5 wearable bluetooth beacon user manual 23
i5 Wearable Bluetooth Beacon Packing list
I5 wearable bluetooth beacon user manual 24

Sample packaging

Sample packaging
I5 wearable bluetooth beacon user manual 25

Ordering Information

DescriptionPN
BLE Beacon, BLE 5.0, 32.6x9mm, Silicon gel bracelet, IP67, 230mAh100-000i5