Saltar al contenido

Puerta de enlace LoRaWAN para interiores

The Lansitec Indoor LoRaWAN Gateway is designed for easy indoor deployment, featuring built-in Ethernet, optional LTE uplink, and 2.4 GHz Wi-Fi for quick AP-based configuration. Powered by Semtech’s SX1302 chipset and supporting LoRaWAN V1.0.3, this gateway offers a scalable solution for small to medium-sized aplicaciones de IoT. With OpenWRT software, built-in network server, and PoE compatibility, it simplifies installation and reduces both hardware and operational costs.

Interior LoRaWAN Gateway Features

¿Qué lo hace único?

  • Full LoRaWAN Stack (V1.0.3) Utilizes the Semtech SX1302 chipset with 8 channels for robust, wide-area coverage.
  • Quick Configuration 2.4 GHz Wi-Fi AP mode allows simple, intuitive setup via Web UI.
  • Multiple Backhaul Options Ethernet (with PoE), Wi-Fi, or optional LTE Cat 4 connectivity.
  • Built-In Network Server Offers easy application deployment and straightforward integration with other puertas de enlace.
  • OpenWRT Firmware Web-based interface supports flexible customization and monitoring.
  • Failover Protection TF card logs and buffers LoRa frames during backhaul disruption.

Interior LoRaWAN Gateway Use Cases

Para qué podría utilizarse

Seguimiento del personal de fábrica mediante balizas Bluetooth.

Industrial IoT Monitoring

Install in factories or warehouses to collect sensor data for preventive maintenance, resource management, and process optimization—without needing separate costly servers.

Baliza industrial B010: Solución avanzada de seguimiento de activos en tiempo real.

Building Automation

Enable smart HVAC, lighting, and access control across multi-floor buildings. The PoE capability allows flexible placement, cutting down on wiring and installation costs.

Seguimiento del campus de Lorawan

Smart Campus or Mall

Cover large indoor spaces such as campuses, shopping malls, and convention centers with minimal puertas de enlace. Take advantage of built-in network server support for quick, unified device management.

Seguimiento de activos hospitalarios mediante balizas Bluetooth

Healthcare Facility Tracking

Power indoor asset tracking (e.g., wheelchairs, beds, medical devices) for hospitals. Use Wi-Fi AP mode to configure, manage, and scale deployments rapidly.

Cultivo en invernadero

Agricultural Greenhouses

Deploy in large indoor farming operations, tracking humidity, temperature, and soil sensores. Leverage PoE or LTE for reliable connectivity where wired broadband is limited.

Gestión de eventos para reuniones de grupos de personas Puerta de enlace Bluetooth para interiores

Temporary Installations

Place in pop-up events, trade shows, or temporary offices for swift IoT sensor deployment. The optional LTE uplink provides a reliable backhaul without needing permanent infrastructure.

Detalles técnicos

Especificaciones del producto

Mecánica

Dimensión

166*127*36mm

Temperatura de funcionamiento

-10 to 55 ˚C

Temperatura de almacenamiento

-40°C to +85°C

Humedad de funcionamiento

0% ~ 95% (sin condensación)

Peso

0.3kg

Protección contra la entrada de agua

IP30

Enclosure Material

ABS

Método de instalación

Wall Mounting

Fuerza

Fuente de alimentación

DC 12 V - 1 A, PoE (IEEE 802.3 af), 36~57 VDC

Consumo de energía

12 W (typical)

ETH

RJ45 (10/100M)

Antena

LoRa: RP-SMA female connector; LTE/WiFi: Internal antenna

Computing

MT7628, DDR2 RAM 128 MB

Wifi Features

Frecuencia

2.4 GHz (802.11b/g/n)

RX Sensitivity

-95 dBm (Min)

20 dBm (Max)

Operation Channels

2.4 GHz: 1-13

Bluetooth Connectivity

Card

SX1302 Mini PCIe card

Canales

8 Channels

RX Sensitivity

-139 dBm (Min)

27 dBm (Max)

Frecuencia

EU433/CN470/EU868/US915/AS923/AU915/IN865/KR920

Cellular Features

Supports Quectel EG95-E/EG95-NA (IoT/M2M -optimized LTE Cat 4 Module)

EG95 -E for EMEA Region:

LTE FDD: B1/B3/B7/B8/B20/B28A
WCDMA: B1/B8
GSM/EDGE: B3/B8

EG95 -NA for North America:

LTE FDD: B2/B4/B5/B12/B13
WCDMA: B2/B4/B5

Proceso de dar un título

CE, FCC, RCM