Saltar al contenido
Tabla de contenido

¿Qué es la tecnología Beacon? Una guía completa.

¿Qué es la tecnología Beacon? Una guía completa.

Tabla de contenido
¿Qué es la tecnología Beacon?
¿Qué es la tecnología Beacon?

As a positioning technology based on the Bluetooth 4.0 (or higher) protocol, Beacon a BLE based device, has attracted more and more attention in the indoor positioning market.

With the development of IoT and the continuous accumulation of big data acquisition and processing requirements, Beacon technology with low power consumption and low cost has become the focus of indoor positioning applications, and its characteristics have driven the rapid implementation of the IoT indoor sistema de posicionamiento.

No Pairing Required

In our impression, we need to pair the Bluetooth devices every day, for example, the Bluetooth headsets, speakers. When the smart bracelet is bound to the mobile phone, it also needs to be paired. The Beacon does not need to be paired.

As mentioned above, it uses the Bluetooth advertising channel to transmit signals and the receiver receives from these channels too. The transmitter and receiver works independently, usually the beacon advertises periodically and the receiver receives only when necessary. The receiver with LoRa, Wi-Fi, 4G, etc. back-haul can be used as a Puerta de enlace Bluetooth to relay beacons’ messages to the cloud. During this process, both parties do not need to be paired. For details, please refer to ‘B-Fixed®PERSONNEL & ASSET TRACKING SOLUTION’ or ‘B-Mobile®PERSONNEL & ASSET TRACKING SOLUTION’.

Receive Information in the Background

Information push based on Beacon positioning requires App support. However, when we use the indoor positioning function to receive Beacon signals, we do not need to open the app.

We only need to open the corresponding app when we need to display the service Beacon pushes.

Beacon can Also Transmit Data After Pairing with The Receiver

A standard Beacon only advertises messages required for positioning in the form of broadcast data.

But, it can also be paired with a receiver for faster data communication.

Low Power Consumption

Lansitec’s BLE beacon average current is 35µA at 0dBm Potencia de TX and 500 ms advertisement interval

It is powered by a 2x1000mAh button battery, the battery life is as follows.

Advertisement Interval (ms)1003005001000
Battery Life (years)1.23.55>6

BLE offers low power consumption (5mA Potencia de TX or even lower), high data rate (less TX time and more sleep time), multiple channels (less interference) and larger link budget (4dBm Potencia de TX and -96dBm sensitivity, longer distance).

Both BLE and Bluetooth clásico cover a range of 100 meters, but BLE has a slightly wider range. Compared with Bluetooth clásico, the biggest advantage of BLE is power consumption which is 90% lower than that of Bluetooth clásico. At the same time, the transmission distance is increased, security and stability are improved, and AES encryption and CRC verification are supported for the security of communication between connected devices.

With the improvement of Bluetooth protocol and semiconductor technology, Bluetooth 5.0 has a great improvement in performance compared to Bluetooth 4.0, the following is a comparison of two Nordic chips.

EspecificaciónNordic nRF51822Nordic nRF52832
ProtocoloBluetooth 4.0Bluetooth 5.0
Sensibilidad-90 dBm @ 1 Mbps, BER = 1E-4-95 dBm @ 1 Mbps BLE (≥128 bytes): BER = 1E-4   -95 dBm @ 1 Mbps BLE (≤37 bytes): BER = 1E-3.17
Peak RX13 mA5.4 mA
Peak TX (0 dBm)10.5 mA5.3 mA
Outdoor Distance (Potencia de TX 0 dBm)50 meters (Line of sight)200
meters (Line of sight)  >1 km with FEC (Forward Error Correction) enabled

Explora el documento técnico: Introducción a la tecnología Bluetooth y términos comunes.

Compartido por

Pam Luthra

Estratega de SEO y contenido especializado en IoT, con experiencia en seguimiento BLE, soluciones LoRaWAN, seguimiento de activos y tecnologías de IoT industrial. Creación de contenido técnicamente preciso y optimizado para motores de búsqueda para audiencias globales de IoT.

Pericia

Revisado técnicamente por Liancheng Su, ingeniero de hardware de IoT en Lansitec.

Este artículo ha sido revisado por nuestros expertos en ingeniería, quienes cuentan con amplia experiencia en soluciones BLE, LoRaWAN e IoT industrial, para garantizar la precisión y confiabilidad técnica.

Última revisión

Comparte esta publicación: