Saltar al contenido
Tabla de contenido

¿Qué factores influyen en la capacidad de una red LoRaWAN?

¿Qué factores influyen en la capacidad de una red LoRaWAN?

Tabla de contenido

1) Frequency band and bandwidth

The frequency band and bandwidth used by LoRaWAN directly affect data transmission speed and capacity. A wider bandwidth allows for more data transmission but consumes more spectrum resources. This is fixed data in LoRaWAN, which is 125KHz, and 500KHz (in some cases in US915 and AU915; refer to the LoRaWAN protocol for details). Also, please refer to the link below on “LoRaWAN Frequency Plan by Country or Region”.

Plan de frecuencias LoRaWAN por país o región

2) Data Rate

LoRaWAN uses an Adaptive Data Rate (ADR) mechanism.

Higher data rate

  • Less transmission time
  • Less time each node occupies the network
  • More overall network capacity
  • Lower the communication distance

Lower data rates

  • More transmission time
  • More time each node occupies the network
  • More overall network capacity
  • Lower the communication distance

3) Number of Nodes

The more devices connected to the network, the more competition there is between nodes, especially when they share the same frequency.

4) Duty Cycle Limitations

LoRaWAN transmissions are constrained by duty cycle limits, meaning each node can only send data for a small portion of time. This restricts the frequency of transmissions from each node and impacts the overall network capacity. For details, refer to LoRaWAN Regional Parameters.

5) Channel Utilization

LoRaWAN typically uses multiple channels for data transmission. Load balancing across different channels can increase overall network capacity. If some channels are overutilized, it can lead to network congestion.

6) Propagation Conditions

Signal propagation conditions (such as geography, obstacles, and electromagnetic interference) affect signal coverage and quality, which in turn impacts network capacity.

7) Number and Distribution of Gateways

The number and location of puertas de enlace affect the network’s coverage and capacity. More puertas de enlace can reduce the load on individual puertas de enlace and increase the overall network capacity.

8) Ratio of Uplink to Downlink Communication

A typical puerta de enlace LoRaWAN has 8 uplink channels and 1 downlink. LoRaWAN is primarily designed for uplink communication (from devices to the network), but downlink communication also uses channel resources. If downlink demand is high, it can reduce the overall network capacity.

Compartido por

Pam Luthra

Estratega de SEO y contenido especializado en IoT, con experiencia en seguimiento BLE, soluciones LoRaWAN, seguimiento de activos y tecnologías de IoT industrial. Creación de contenido técnicamente preciso y optimizado para motores de búsqueda para audiencias globales de IoT.

Pericia

Revisado técnicamente por Liancheng Su, ingeniero de hardware de IoT en Lansitec.

Este artículo ha sido revisado por nuestros expertos en ingeniería, quienes cuentan con amplia experiencia en soluciones BLE, LoRaWAN e IoT industrial, para garantizar la precisión y confiabilidad técnica.

Última revisión

Comparte esta publicación: